Custom AV and Smart Home Install Sales | (973) 232-5281 | Short Hills, NJ | Mon-Fri: 9am-5pm EST
ynVISION Product Sales & Support | 1 Como Ct, Towaco, NJ 07082 | (973) 544-1122 | info@ynvision.design | Mon-Fri: 9am-5pm EST
You Envision, We Design
Lutron Tabletop Keypads for RadioRA 3
Place whole-room and whole-home control on a nightstand, desk, side table, kitchen counter, or home-theater console.
Lutron's tabletop designer keypads, RR-T5RL, RR-T10RL, and RR-T15RL, remain listed by Lutron as RadioRA 3-compatible legacy devices. They provide clearly labeled, backlit buttons for lighting, motorized shades, draperies, screens, and programmed scenes without requiring a permanent wall-mounted location. Confirm current ordering availability before designing a new project around one of these models.
Key Features of Lutron Tabletop Keypads
Convenient Scene Control Within Reach
Large rounded buttons angle the engraving upward, making labels easier to read while the keypad rests on a table, and backlit engraving keeps them legible at night.
Three sizes are published, five-button, 10-button, and 15-button, each with raise/lower plus All On and All Off, so the keypad can provide anything from simple room control to an extensive collection of lighting, shade, and whole-home scenes. Engraved replacement kits (RK-T5RL, RK-T10RL, RK-T15RL) let the labeling be changed later.
Tabletop, Cordless, or Wall-Mounted Use
The designer keypad can be placed on a tabletop, used as a cordless keypad, or mounted on a wall, a mounting bracket is included for wall applications.
It can operate from two AAA alkaline batteries (included) or from the 9 V, 300 mA DC adapter. Using the adapter enables consistent keypad backlighting without routine battery replacement.
Personalized Control at the Touch of a Button
Bedside Control
Turn off the house, adjust bedroom lighting, and close motorized shades from the nightstand.
Entertainment Control
Activate Movie, Music, Entertain, or Intermission scenes from a theater seat or side table.
Whole-Home Commands
Program All On, All Off, Welcome, Away, Vacation, and other homeowner-specific routines.
Designed for Clear, Organized Control
-
Five-, 10-, and 15-Button Models: Different layouts support simple or extensive scene collections.
-
Raise and Lower Controls: All three published models include raise/lower plus All On and All Off.
-
Backlit Engraving: Labels remain readable in low-light conditions; backlight intensity is set in programming.
-
Battery or Adapter Power: Two AAA alkaline batteries (included) or the 9 V, 300 mA DC adapter.
-
RF Communication: Clear Connect Type A. The keypad must be located within 30 ft of the RadioRA 3 processor or a repeater.
-
RadioRA 3 Support: RR-T5RL, RR-T10RL, and RR-T15RL appear on Lutron's published RadioRA 3 compatibility list; confirm current ordering availability before specifying them.
-
Finishes: Lutron publishes this family in two finishes, Midnight (MN) and Snow (SW). Confirm current availability before ordering.
Tabletop Keypad Programming in New Jersey
ynVISION determines the best keypad size, button layout, scene names, engraving, power method, and placement for each room, and confirms the keypad's position relative to the processor or repeater so it stays reliable.
We program tabletop keypads as part of complete RadioRA 3 lighting and shade systems throughout Short Hills, Millburn, Summit, Livingston, and surrounding Northern New Jersey communities.
Testimonials
ynVision.Design provides Lutron RadioRa 3 Lighting Design, Installation and Services in and around the following Essex County, Hundson County, Union County and Middlesex County areas:
Bayonne
Caldwell
Cranford
East Brunswick
Edison
Essex Fells
Hoboken
Jersey City
Kenilworth
Livingston
Metuchen
Monroe Township
Montclair
Mountainside
New Brunswick
North Bergen
North Brunswick
Piscataway
Roseland
Scotch Plains
Secaucus
Short Hills
Summit
Union
Upper Montclair
Verona
Weehawken
West New York
West Orange
Westfield